Bargraph Meter
Bargraph Meter Relay
MODEL 1913, 1914
- ■Clear bar graph display by adopting a custom LED
- ■High Accuracy and high reliability because of LSI adoption
- ■Setting and change of setting value are possible from the front panel.
Model Designation
191 | □ | - | □ | - | □ |
A | B | C |
Code | Settings |
---|---|
3 | 2 set points (H/L) |
4 | 4 set points (HH/H/L/LL) |
Code | Input |
---|---|
1 | DC 0-1 mA |
2 | DC 4-20 mA |
3 | DC 0-1 V |
4 | DC 1-5 V |
5 | DC 0-5 V |
0 | Other than those above * |
- *:
- Input Voltage less than DC 10 V
Input Current less than DC 50 mA
Code | Power Voltage |
---|---|
A | AC 85-264 V |
7 | DC 5 V * |
9 | DC 24 V |
- *:
- Terminals between power supply and input are non-insulated..
Specifications
Models | 1913 | 1914 | ||||||||
---|---|---|---|---|---|---|---|---|---|---|
Display | LED (Color: Red) | |||||||||
Bar dots | 101 | |||||||||
Scale length | 100 mm (1.5 mm width) | |||||||||
Accuracy | ±(1% of FS + 1 digit) | |||||||||
Response time | 0.5s | |||||||||
Scale plate | Black Aluminum(White scale & white characters) | |||||||||
H/L settings | H / L (2 points) | HH / H / L / LL (4 points) | ||||||||
Output signal | Contact output | |||||||||
Setting range | H:(set value of L + 1%) to 100% L:(set value of H - 1%) to 0% |
HH :(set value of H + 1%)to 100% H :(set value of HH - 1%)to(set value of L +1%) L :(set value of H - 1%)to(set value of LL + 1%) LL :(set value of L - 1%)to 0% |
||||||||
Relay output | H : 1 transfer L : 1 transfer |
H / L : Contact on each 1a HH / LL : 1 transfer * |
||||||||
Contact capacity | AC125V 0.5A (Resistance load) | |||||||||
Insulation resistance | Between all terminals to outer case DC 500 V, More than 10 MΩ | |||||||||
Withstanding voltage |
|
|||||||||
Power supply | AC 85-264 V 50/60 Hz DC 24 V ± 15% DC 5 V ± 5% |
|||||||||
Power consumption | 7 VA(AC 85-264 V) 4 W(DC 24 V) 2 W(DC 5 V) |
|||||||||
Operating temperature | 0 to 45°C | |||||||||
Storage temperature | -20 to 70°C | |||||||||
Weight | Applox. 400 g | Applox. 420 g |
*HH and H/LL and L:Common terminals are common to each other
Input Specifications
Code | Input Signal | Input Impedance |
---|---|---|
1 | DC 0-1 mA | 200 Ω |
2 | DC 4-20 mA | 10 Ω |
3 | DC 0-1 V | More than 100 kΩ |
4 | DC 1-5 V | More than 250 kΩ |
5 | DC 0-5 V |
No. | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10 | 11 | 12 |
---|---|---|---|---|---|---|---|---|---|---|---|---|
Max. value | 1 | 1.2 | 1.5 | 2 | 2.5 | 3 | 4 | 5 | 6 | 7.5 | 8 | 9 |
Division No. | 50 | 24 | 30 | 40 | 50 | 30 | 40 | 50 | 30 | 37.5 | 40 | 45 |
![](/foreign/products/1921/graf01.gif)