Digital Meter
DC Voltmeter/Ammeter, Receiver
MODEL 3153B
- ■ 45 mm character size clear bright large LED display.
- ■ Equipped with scaling function.
- ■ Available with average calculation, display hold, peak/bottom display function.
- ■ AC power supply 100 to 240 V.
Standard Specifications
Model Designation
| 3153B | - | □ | - | A | - | □ |
| ① | ② | ③ |
①Measuring Input
| Code | Measuring Range | Input Resistance | Accuracy * | Overload |
|---|---|---|---|---|
| 02 | ±99.99 mV | 100 MΩ | ±(0.05% of rdg + 1 digit) | DC ±250 V |
| 03 | ±999.9 mV | 10 MΩ | ±(0.05% of rdg + 1 digit) | DC ±250 V |
| 04 | ±9.999 V | 10 MΩ | ±(0.1% of rdg + 1 digit) | DC ±250 V |
| 05 | ±99.99 V | 10 MΩ | ±(0.1% of rdg + 1 digit) | DC ±500 V |
| 09 | 1 to 5 V | 1 MΩ | ±(0.1% of rdg + 1 digit) | DC ±250 V |
| 13 | ±999.9 µA | 100 Ω | ±(0.1% of rdg + 1 digit) | DC ±50 mA |
| 14 | ±9.999 mA | 10 Ω | ±(0.1% of rdg + 1 digit) | DC ±150 mA |
| 15 | ±99.99 mA | 1 Ω | ±(0.1% of rdg + 1 digit) | DC ±500 mA |
| 16 | ±999.9 mA | 0.1 Ω | ±(0.1% of rdg + 1 digit） | DC ±2 A |
| 19 | 4 to 20 mA | 12.5 Ω | ±(0.1% of rdg + 1 digit） | DC ±150 mA |
- * Accuracy:
- Defined in the condition of 23 ± 5°C, 45 to75% RH.
- Temperature coefficient:
- ±150 ppm/°C, (operating temp. range: 0 to 50°C.
② Power Supply
| Code | Power Source Voltage |
|---|---|
| A | AC 100 to 240 V |
③Display Color
| Code | Description |
|---|---|
| R | Red LED |
| G | Green LED |
General Specifications
| Display | Red or green LED, character height 45 mm, with zero-suppress function. |
|---|---|
| Display scaling | Full scale display: -9999 to 9999 Offset display: -9999 to 9999 |
| Offset fixing function | The display for the value less than the offset value can be set to display the offset value. |
| Decimal point | Arbitrarily settable from the terminal blocks |
| Over-range display | When exceeded 100% or 130%, indicated with  When exceeded -100% or -130%, indicated with  . |
| Display cycle | 67ms, 400ms, 1s, 2s, 3s, 4s, 5s Selection of setting available |
| Average calculation | Divisional averaging or moving average, and the numbers of samples for averaging can be selected. OFF: No moving averaging ON: Divisional averaging Numbers of sample for averaging, 2, 4, 8, 16, 32 |
| Hold function | Holds measurement data (No isolation and measurement input) |
| Peak / Bottom change-over | Function of the terminal block P/B can be changed to maximum or minimum value display. |
| 100 digit turn out | The display of 100 digit is compulsorily turn out. |
| Power supply | AC 100 to 240 V, 50/60 Hz |
| Tolerance of source voltage | AC 90 to 250 V |
| Power consumption | AC 100 V … Approx. 4 VA AC 200 V … Approx. 5 VA |
| Operating temperature | 0 to 50°C |
| Operating humidity | 35 to 85% RH （No condensation） |
| Storage temperature | -20 to 70°C |
| Insulation resistance | DC 500 V More than 50 MΩ |
| Withstand voltage | Between input terminal and external case: AC 1500 V for 1min. Between power supply terminals and external case: AC 1500 V for 1min. Between power supply terminals and input terminals: AC 1500 V for 1min. |
| Weight | Approx. 900 g |
| Unit Indication | Designated character is adhered at the right bottom of the front mask. (It has to be designated at the time of ordering.) |
| Protection Degree | Front side IP40, back side IP20 |
